Jiangmen selects conductive copper foil manufacturers
The air supply of general air conditioning has a large impact. For the stains caused by the dirty electrolyte, the filtering of electrolyte should be strengthened. After being transferred from the electrolytic cell, the copper foil must be washed with electrolyte, because the surface of the copper foil is attached with organic matter or other impurities. The water pressure of copper foil washing must have enough pressure and a certain amount of water.
Jiangmen selects conductive copper foil manufacturers
The copper clad laminate is composed of copper foil, reinforcement material and adhesive. Plates are usually classified according to the reinforcement material category and adhesive category or plate characteristics.
Jiangmen selects conductive copper foil manufacturers
Copper foil can be divided into many kinds according to different classifications. According to the thickness, it can be divided into: thickness (more than 70 μ m) Regular thickness copper foil (more than 18 μ M but less than 70 μ m) Thin copper foil (more than 12 μ M but less than 18 μ m) Ultra thin copper foil (less than 12 μ m) Etc.
Jiangmen selects conductive copper foil manufacturers
In order to improve the adhesion strength of copper foil to the substrate, Generally, oxidation (that is, after oxidation treatment, a layer of copper oxide or cuprous oxide is generated on the surface, which improves the bonding strength of the copper foil and the substrate due to the polarity) or roughening copper foil (using electrochemical methods to generate a layer of roughening layer on the surface of the copper foil, which increases the surface area of the copper foil, and improves the bonding strength of the copper foil and the substrate due to the anchoring effect of the roughening layer on the substrate) is used.
Jiangmen selects conductive copper foil manufacturers
Electronic circuit copper foil plays an important role in conducting electricity and heat in printed circuit board (PCB), and is known as the neural network on PCB. At present, copper foil for electronic circuits (PCB copper foil) is divided into two categories, namely conventional copper foil and high-performance copper foil.
