Nanjing Preferred Copper Foil Price
Speaking saliva splashes on the surface, and stains will appear when saliva is rolled up. A short time is a dark point, and a long time is a dark point. The size of the point is related to the saliva splashed on the copper foil.
Nanjing Preferred Copper Foil Price
The electrolyte contains oil, paint, grease, sediment and other contaminants attached to the surface of copper foil. After being squeezed by the squeezing (water) roller, the contaminants are squeezed flat, some contaminants attach to it, and some contaminants attach to the guide roller. Because the dirt is squeezed up during the operation, the dirt has a head and a tail, and has a direction.
Nanjing Preferred Copper Foil Price
In order to avoid the copper oxide powder falling off and moving to the substrate, the surface treatment method has also been constantly improved. For example, TW copper foil is coated with a thin layer of zinc on the roughened surface of the copper foil, and the surface is gray; TC type copper foil is coated with a thin layer of copper zinc alloy on the roughened surface of the copper foil. At this time, the surface of the copper foil is golden yellow. After special treatment, the thermal discoloration resistance, oxidation resistance and cyanide resistance of copper foil in PCB manufacturing are improved accordingly.
Nanjing Preferred Copper Foil Price
Calendered copper foil products have good ductility, flexibility, low roughness and high folding resistance, and have become the basic materials of flexible printed circuit boards, mainly used in flexible circuit boards and high-frequency circuit boards.
Nanjing Preferred Copper Foil Price
Calendered copper foil is the original foil made from copper plate by repeated rolling, and then roughened according to requirements. Due to the limitation of processing technology, its width is difficult to meet the requirements of rigid copper clad laminate, so calendered copper foil is rarely used on rigid copper clad laminate; However, because the bending resistance and elastic coefficient are greater than electrolytic copper foil, they are often used on flexible copper clad laminate.
Nanjing Preferred Copper Foil Price
Copper clad laminate is the base plate for manufacturing PCB, which is an important type with large amount of materials. The manufacturing process of copper clad laminate is to impregnate glass fiber cloth, glass fiber mat, paper and other reinforcement materials with epoxy resin, phenolic resin and other adhesives, dry them to the first stage at appropriate temperature, obtain pre impregnating materials (referred to as impregnating materials), and then stack them according to process requirements and copper foil, The required copper clad laminate is obtained by heating and pressurizing on the laminator.
