Huizhou Preferred Copper Foil Manufacturer
Electrolytic copper foil is made by dissolving copper into copper sulfate solution, electrodepositing the copper sulfate electrolyte under the action of direct current in special electrolytic equipment to make the original foil, and then carrying out surface treatment, heat-resistant layer treatment, oxidation prevention treatment and other surface treatment processes on the original foil according to customer requirements.
Huizhou Preferred Copper Foil Manufacturer
Speaking saliva splashes on the surface, and stains will appear when saliva is rolled up. A short time is a dark point, and a long time is a dark point. The size of the point is related to the saliva splashed on the copper foil.
Huizhou Preferred Copper Foil Manufacturer
With electrolytic copper or wire return material of equal purity as raw material, it is dissolved in the solution containing copper sulfate. Electrolysis is carried out in an electrolytic cell with insoluble material as anode and cathode roller immersed in copper sulfate electrolyte at constant speed as cathode. Copper in the solution is deposited on the surface of cathode roller to form copper foil. The thickness is controlled by cathode current density and cathode roller speed. After the roller rotates out of the liquid level, it is continuously stripped from the cathode roll, washed, dried and rolled to generate the original foil.
Huizhou Preferred Copper Foil Manufacturer
The production process of electrolytic copper foil is simple. There are three main processes: solution raw foil, surface treatment and product slitting. The production process seems simple, but it is a production process that integrates electronics, machinery and electrochemistry, and is particularly strict with the production environment. Therefore, the industry does not have a set of standard and universal production equipment and technology, and each manufacturer shows its own ingenuity, which is also an important bottleneck affecting the improvement of domestic production capacity and quality. In addition, the different requirements of customers have also resulted in the waste of many intermediate products copper foil in manufacturing. The one-time input-output ratio is even less than 80%, and these copper foils have to be manufactured again, wasting resources.
Huizhou Preferred Copper Foil Manufacturer
With the development of high-density wiring technology for low profile copper foil multilayer boards, the traditional type cannot meet the needs of manufacturing high-precision printed circuit boards. Therefore, a new generation of copper foils, low profile (LP) and ultra-low profile (VLP), have emerged one after another. Compared with ordinary electrolytic copper foil, LP copper foil has fine crystal (2/zm), equiaxed grains, no columnar crystals, lamellar crystals, flat prisms and low surface roughness.
Huizhou Preferred Copper Foil Manufacturer
Calendered copper foil products have good ductility, flexibility, low roughness and high folding resistance, and have become the basic materials of flexible printed circuit boards, mainly used in flexible circuit boards and high-frequency circuit boards.