Chaozhou chooses pcb copper foil price
Most copper foils used for domestic printed boards are 35um thick, and 50um copper foils are used as transition products. In high-precision hole metallized double-sided or multilayer board manufacturing, thinner than 35um copper foils, such as 18um, 9um and 5um copper foils, are expected. Some multilayer boards use thicker copper foil, such as 70um.
Chaozhou chooses pcb copper foil price
The calendered copper foil is made by repeated rolling annealing process of copper ingot based on the principle of plastic processing. Its internal structure is lamellar crystal structure, and the product has good ductility. At present, it is mainly used in the production of rigid circuit boards, while the rolled copper foil is mainly used in flexible and high-frequency circuit boards.
Chaozhou chooses pcb copper foil price
Excellent tensile strength and elongation High tensile strength and elongation under normal conditions can improve processing ability, enhance rigidity and avoid wrinkles to improve production qualification rate. High temperature extensibility (THE) copper foil and high tensile strength copper foil at high temperature can improve the thermal stability of printed boards and avoid deformation and warpage.
Chaozhou chooses pcb copper foil price
The copper clad laminate is composed of copper foil, reinforcement material and adhesive. Plates are usually classified according to the reinforcement material category and adhesive category or plate characteristics.
Chaozhou chooses pcb copper foil price
The surface of the copper foil shall be smooth and clean without obvious wrinkles, oxidation spots, scratches, pitting, pits and stains. The porosity of 305g/m2 and above shall not exceed 8 penetration points within the area of 300ram × 300mm; The total area of pores on an area of 0.5m2 shall not exceed the circular area with a diameter of 0.125mm.
Chaozhou chooses pcb copper foil price
According to the burning degree of the substrate in the flame and after leaving the ignition source, it can be divided into general type and self extinguishing type; According to the bending degree of the substrate, it can be divided into rigid and flexible laminates; According to the working temperature and working environment conditions of the substrate, it can be divided into heat resistant, radiation resistant, high-frequency foil clad plate, etc. In addition, there are also laminates used in special occasions, such as prefabricated inner laminates, metal based laminates, and copper foil, nickel foil, silver foil, aluminum foil, Kang copper foil, beryllium copper foil laminates according to the type of foil.
