Shaoxing Preferred Copper Foil Manufacturer for Heat Dissipation
Silane coupling agent treatment: after anti oxidation treatment, the surface is sprayed with silane, which can improve the oxidation resistance at room temperature on the one hand; On the other hand, in high temperature pressing plate, silane can better combine copper foil and resin substrate through coupling, and improve peel strength. Post treatment process - drying. In order to prevent the harm of residual moisture, it must be dried at not less than 100 ℃ later, and the drying temperature cannot be too high.
Shaoxing Preferred Copper Foil Manufacturer for Heat Dissipation
The production process of electrolytic copper foil is simple. There are three main processes: solution raw foil, surface treatment and product slitting. The production process seems simple, but it is a production process that integrates electronics, machinery and electrochemistry, and is particularly strict with the production environment. Therefore, the industry does not have a set of standard and universal production equipment and technology, and each manufacturer shows its own ingenuity, which is also an important bottleneck affecting the improvement of domestic production capacity and quality. In addition, the different requirements of customers have also resulted in the waste of many intermediate products copper foil in manufacturing. The one-time input-output ratio is even less than 80%, and these copper foils have to be manufactured again, wasting resources.
Shaoxing Preferred Copper Foil Manufacturer for Heat Dissipation
The calendered copper foil is made by repeated rolling annealing process of copper ingot based on the principle of plastic processing. Its internal structure is lamellar crystal structure, and the product has good ductility. At present, it is mainly used in the production of rigid circuit boards, while the rolled copper foil is mainly used in flexible and high-frequency circuit boards.
Shaoxing Preferred Copper Foil Manufacturer for Heat Dissipation
The adhesives used for the laminates mainly include phenolic, epoxy, polyester, polyimide, polytetrafluoroethylene resin, etc. Therefore, the laminates are also divided into phenolic, epoxy, polyester, polyimide, and polytetrafluoroethylene laminates.
Shaoxing Preferred Copper Foil Manufacturer for Heat Dissipation
With the further competition in the market, even those with high added value have to be controlled from the production cost. Because the production requires very strict cleanliness of its electrolytic solution (copper sulfate solution), many filtration systems and liquid feeding pumps are repeatedly used in previous production processes. A new process flow is provided here, which can fundamentally control product quality and reduce production costs.
