Ganzhou optimized copper foil price of circuit board
Foil making material requirements: the thinner the thickness is, the higher the quality grade is, and the lower the impurity content in the electrolyte is required. In order to ensure the quality, the purity of copper must be greater than 99.9%.
Ganzhou optimized copper foil price of circuit board
With the development of high-density wiring technology for low profile copper foil multilayer boards, the traditional type cannot meet the needs of manufacturing high-precision printed circuit boards. Therefore, a new generation of copper foils, low profile (LP) and ultra-low profile (VLP), have emerged one after another. Compared with ordinary electrolytic copper foil, LP copper foil has fine crystal (2/zm), equiaxed grains, no columnar crystals, lamellar crystals, flat prisms and low surface roughness.
Ganzhou optimized copper foil price of circuit board
In order to avoid the copper oxide powder falling off and moving to the substrate, the surface treatment method has also been constantly improved. For example, TW copper foil is coated with a thin layer of zinc on the roughened surface of the copper foil, and the surface is gray; TC type copper foil is coated with a thin layer of copper zinc alloy on the roughened surface of the copper foil. At this time, the surface of the copper foil is golden yellow. After special treatment, the thermal discoloration resistance, oxidation resistance and cyanide resistance of copper foil in PCB manufacturing are improved accordingly.
Ganzhou optimized copper foil price of circuit board
Small dirt, small exclamation mark. During the production of raw foil, the hair side is upward, and the dirt in liquid and air all fall on the hair side, which is printed on the smooth side after rolling. The reason is that the stains on the cathode roll are not dried. The surface temperature of the cathode roll is only 50 degrees, and the air temperature in the workshop is generally about 25 degrees. The surface hairiness is very good. The dirt itself has water, and the drying time is only 2-3 minutes. Therefore, the dirt on the copper foil cannot be completely dried.
Ganzhou optimized copper foil price of circuit board
Copper foil can be divided into many kinds according to different classifications. According to the thickness, it can be divided into: thickness (more than 70 μ m) Regular thickness copper foil (more than 18 μ M but less than 70 μ m) Thin copper foil (more than 12 μ M but less than 18 μ m) Ultra thin copper foil (less than 12 μ m) Etc.
Ganzhou optimized copper foil price of circuit board
Excellent tensile strength and elongation High tensile strength and elongation under normal conditions can improve processing ability, enhance rigidity and avoid wrinkles to improve production qualification rate. High temperature extensibility (THE) copper foil and high tensile strength copper foil at high temperature can improve the thermal stability of printed boards and avoid deformation and warpage.
