Pingxiang chooses the price of electrolytic copper foil
Copper foil is divided into calendered copper foil and electrolytic copper foil according to the preparation process, which accounts for the vast majority of the market. According to the Copper Foil Branch of China Electricity Association (CCFA), at present, domestic manufacturers mainly focus on the production of electrolytic copper foil. In 19 years, the domestic production capacity of electrolytic copper foil is expected to be close to 600000 tons, while that of rolled copper foil is only about 10000 tons.
Pingxiang chooses the price of electrolytic copper foil
The technical feature of electrolytic copper foil is that various technical conditions in electrolyte and additives must be strictly controlled, so equipment alone is not enough to produce high-performance copper foil; High performance has high requirements for the materials of anode plate and cathode roll in the raw foil equipment, the processing accuracy and consistency of the equipment; In the production process, the concentration of copper and acid in the electrolyte needs to be monitored and adjusted in real time.
Pingxiang chooses the price of electrolytic copper foil
The surface of the copper foil shall be smooth and clean without obvious wrinkles, oxidation spots, scratches, pitting, pits and stains. The porosity of 305g/m2 and above is required to be 300ram × No more than 8 penetration points within 300mm area; The total area of pores on an area of 0.5m2 shall not exceed the circular area with a diameter of 0.125mm.
Pingxiang chooses the price of electrolytic copper foil
If the rough surface and pinholes appear at the same time when there are stains on the rough surface, it indicates that the stains are caused by the dirty electrolyte, and the dirt is attached to the copper foil in the electrolytic cell. If there are stains on the rough surface, the copper foil is not rough and there are no pinholes, it means that the workshop production environment is dirty, the air contains dust, or other suspended impurities fall on the surface of the copper foil.
Pingxiang chooses the price of electrolytic copper foil
High end lithium battery copper foil needs to meet the requirements of high energy density, high safety, lightweight and other characteristics of power batteries, which is also the development trend of power batteries in the future. In order to meet the above characteristics, thinner lithium copper foil means smaller resistance, so the energy density and other performance of the battery will be improved. Moreover, the thinner the copper foil of lithium battery is, the lighter the weight of the corresponding battery will be.
Pingxiang chooses the price of electrolytic copper foil
Definition of electrolytic copper foil: it is formed by depositing copper ions in electrolyte on the round cathode roller of smooth rotating stainless steel plate (or titanium plate). The surface close to the cathode roller is called smooth surface, and the other surface is called rough surface.
