Huai'an Preferred Copper Foil Manufacturer of Lithium Battery
Although the thickness of copper foil gradually becomes thinner, power battery manufacturers use 6 μ When the product is less than or equal to m, the coating machine, winding machine and other key equipment as well as the technological level cannot solve the problems such as wrinkles, belt breakage and high-temperature oxidation encountered in the production process, which leads to the inability to mass produce ultra-thin copper foil with high yield.
Huai'an Preferred Copper Foil Manufacturer of Lithium Battery
In order to improve the adhesion strength of copper foil to the substrate, Generally, oxidation (that is, after oxidation treatment, a layer of copper oxide or cuprous oxide is generated on the surface, which improves the bonding strength of the copper foil and the substrate due to the polarity) or roughening copper foil (using electrochemical methods to generate a layer of roughening layer on the surface of the copper foil, which increases the surface area of the copper foil, and improves the bonding strength of the copper foil and the substrate due to the anchoring effect of the roughening layer on the substrate) is used.
Huai'an Preferred Copper Foil Manufacturer of Lithium Battery
Electrolytic copper foil is made by dissolving copper into copper sulfate solution, electrodepositing the copper sulfate electrolyte under the action of direct current in special electrolytic equipment to make the original foil, and then carrying out surface treatment, heat-resistant layer treatment, oxidation prevention treatment and other surface treatment processes on the original foil according to customer requirements.
Huai'an Preferred Copper Foil Manufacturer of Lithium Battery
The commonly used reinforcement materials of copper clad laminate are alkali free (alkali metal oxide content shall not exceed 0.5%) glass fiber products (such as glass cloth, glass felt) or paper (such as wood pulp paper, bleached wood pulp paper, cotton wool paper). Therefore, laminates can be divided into glass cloth base and paper base.
