Ningbo Preferred Rolling Copper Foil Manufacturer
The technical feature of electrolytic copper foil is that various technical conditions in electrolyte and additives must be strictly controlled, so equipment alone is not enough to produce high-performance copper foil; High performance has high requirements for the materials of anode plate and cathode roll in the raw foil equipment, the processing accuracy and consistency of the equipment; In the production process, the concentration of copper and acid in the electrolyte needs to be monitored and adjusted in real time.
Ningbo Preferred Rolling Copper Foil Manufacturer
Silane coupling agent treatment: after anti oxidation treatment, the surface is sprayed with silane, which can improve the oxidation resistance at room temperature on the one hand; On the other hand, in high temperature pressing plate, silane can better combine copper foil and resin substrate through coupling, and improve peel strength. Post treatment process - drying. In order to prevent the harm of residual moisture, it must be dried at not less than 100 ℃ later, and the drying temperature cannot be too high.
Ningbo Preferred Rolling Copper Foil Manufacturer
At the same time of thinning, it is also necessary to improve the tensile strength, elongation and other indicators, otherwise it is easy to cause copper foil fracture, affecting the safety of the battery. Therefore, it is the general trend that the future use will be more light and meet the above indicators.
Ningbo Preferred Rolling Copper Foil Manufacturer
The commonly used reinforcement materials of copper clad laminate are alkali free (alkali metal oxide content shall not exceed 0.5%) glass fiber products (such as glass cloth, glass felt) or paper (such as wood pulp paper, bleached wood pulp paper, cotton wool paper). Therefore, laminates can be divided into glass cloth base and paper base.
Ningbo Preferred Rolling Copper Foil Manufacturer
The air supply of general air conditioning has a large impact. For the stains caused by the dirty electrolyte, the filtering of electrolyte should be strengthened. After being transferred from the electrolytic cell, the copper foil must be washed with electrolyte, because the surface of the copper foil is attached with organic matter or other impurities. The water pressure of copper foil washing must have enough pressure and a certain amount of water.
Ningbo Preferred Rolling Copper Foil Manufacturer
The electrolyte contains oil, paint, grease, sediment and other contaminants attached to the surface of copper foil. After being squeezed by the squeezing (water) roller, the contaminants are squeezed flat, some contaminants attach to it, and some contaminants attach to the guide roller. Because the dirt is squeezed up during the operation, the dirt has a head and a tail, and has a direction.
