Ningbo Preferred Battery Copper Foil Manufacturer
With the development of high-density wiring technology for low profile copper foil multilayer boards, the traditional type cannot meet the needs of manufacturing high-precision printed circuit boards. Therefore, a new generation of copper foils, low profile (LP) and ultra-low profile (VLP), have emerged one after another. Compared with ordinary electrolytic copper foil, LP copper foil has fine crystal (2/zm), equiaxed grains, no columnar crystals, lamellar crystals, flat prisms and low surface roughness.
Ningbo Preferred Battery Copper Foil Manufacturer
The technical feature of electrolytic copper foil is that various technical conditions in electrolyte and additives must be strictly controlled, so equipment alone is not enough to produce high-performance copper foil; High performance has high requirements for the materials of anode plate and cathode roll in the raw foil equipment, the processing accuracy and consistency of the equipment; In the production process, the concentration of copper and acid in the electrolyte needs to be monitored and adjusted in real time.
Ningbo Preferred Battery Copper Foil Manufacturer
The copper clad laminate is composed of copper foil, reinforcement material and adhesive. Plates are usually classified according to the reinforcement material category and adhesive category or plate characteristics.
Ningbo Preferred Battery Copper Foil Manufacturer
Calendered copper foil products have good ductility, flexibility, low roughness and high folding resistance, and have become the basic materials of flexible printed circuit boards, mainly used in flexible circuit boards and high-frequency circuit boards.
Ningbo Preferred Battery Copper Foil Manufacturer
Most copper foils used for domestic printed boards are 35um thick, and 50um copper foils are used as transition products. In high-precision hole metallized double-sided or multilayer board manufacturing, thinner than 35um copper foils, such as 18um, 9um and 5um copper foils, are expected. Some multilayer boards use thicker copper foil, such as 70um.
