Huai'an selects the best anti-static copper foil manufacturer
Calendered copper foil is a product made by repeatedly rolling and annealing high-precision copper strip (usually less than 150 microns in thickness) based on the principle of plastic processing (usually 4-100 microns in thickness and<800 mm in width). Its ductility, bending resistance and conductivity are better than those of electrolytic copper foil, and the copper purity is also higher than that of electrolytic copper foil.
Huai'an selects the best anti-static copper foil manufacturer
The production of extremely thin copper foil has high barriers, and the products produced still need to meet many requirements of downstream lithium ion battery manufacturers. For investors, they should not only focus on the single index of thickness, not all manufacturers produce 6 μ M Copper foil is consistent, and the thinner the better.
Huai'an selects the best anti-static copper foil manufacturer
Copper foil is a key conductive material in lithium ion batteries and printed circuit boards. It is a kind of negative electrolytic material, a thin, continuous metal foil deposited on the substrate of circuit board.
Huai'an selects the best anti-static copper foil manufacturer
With the development of high-density wiring technology for low profile copper foil multilayer boards, the traditional type cannot meet the needs of manufacturing high-precision printed circuit boards. Therefore, a new generation of copper foils, low profile (LP) and ultra-low profile (VLP), have emerged one after another. Compared with ordinary electrolytic copper foil, LP copper foil has fine crystal (2/zm), equiaxed grains, no columnar crystals, lamellar crystals, flat prisms and low surface roughness.
Huai'an selects the best anti-static copper foil manufacturer
Calendered copper foil is the original foil made from copper plate by repeated rolling, and then roughened according to requirements. Due to the limitation of processing technology, its width is difficult to meet the requirements of rigid copper clad laminate, so calendered copper foil is rarely used on rigid copper clad laminate; However, because the bending resistance and elastic coefficient are greater than electrolytic copper foil, they are often used on flexible copper clad laminate.
Huai'an selects the best anti-static copper foil manufacturer
During the production of copper foil, tiny foreign matters are adhered on the surface to form spots with different colors from the surface, which are called stains. Judgment method: use macroscopic inspection to judge whether it is a waste product, a secondary product or a finished product according to the number and area of stains and the impact on product quality.
