Zhoushan chooses the best manufacturer of double conductor copper foil
Silane coupling agent treatment: after anti oxidation treatment, the surface is sprayed with silane, which can improve the oxidation resistance at room temperature on the one hand; On the other hand, in high temperature pressing plate, silane can better combine copper foil and resin substrate through coupling, and improve peel strength. Post treatment process - drying. In order to prevent the harm of residual moisture, it must be dried at not less than 100 ℃ later, and the drying temperature cannot be too high.
Zhoushan chooses the best manufacturer of double conductor copper foil
Electronic circuit copper foil plays an important role in conducting electricity and heat in printed circuit board (PCB), and is known as the neural network on PCB. At present, copper foil for electronic circuits (PCB copper foil) is divided into two categories, namely conventional copper foil and high-performance copper foil.
Zhoushan chooses the best manufacturer of double conductor copper foil
High end lithium battery copper foil needs to meet the requirements of high energy density, high safety, lightweight and other characteristics of power batteries, which is also the development trend of power batteries in the future. In order to meet the above characteristics, thinner lithium copper foil means smaller resistance, so the energy density and other performance of the battery will be improved. Moreover, the thinner the copper foil of lithium battery is, the lighter the weight of the corresponding battery will be.
Zhoushan chooses the best manufacturer of double conductor copper foil
Electrolytic copper foil is made by dissolving copper into copper sulfate solution, electrodepositing the copper sulfate electrolyte under the action of direct current in special electrolytic equipment to make the original foil, and then carrying out surface treatment, heat-resistant layer treatment, oxidation prevention treatment and other surface treatment processes on the original foil according to customer requirements.
Zhoushan chooses the best manufacturer of double conductor copper foil
Definition of electrolytic copper foil: it is formed by depositing copper ions in electrolyte on the round cathode roller of smooth rotating stainless steel plate (or titanium plate). The surface close to the cathode roller is called smooth surface, and the other surface is called rough surface.
Zhoushan chooses the best manufacturer of double conductor copper foil
Calendered copper foil is the original foil made from copper plate by repeated rolling, and then roughened according to requirements. Due to the limitation of processing technology, its width is difficult to meet the requirements of rigid copper clad laminate, so calendered copper foil is rarely used on rigid copper clad laminate; However, because the bending resistance and elastic coefficient are greater than electrolytic copper foil, they are often used on flexible copper clad laminate.
