Suzhou Preferred Cooling Copper Foil Manufacturer
The technical feature of electrolytic copper foil is that various technical conditions in electrolyte and additives must be strictly controlled, so equipment alone is not enough to produce high-performance copper foil; High performance has high requirements for the materials of anode plate and cathode roll in the raw foil equipment, the processing accuracy and consistency of the equipment; In the production process, the concentration of copper and acid in the electrolyte needs to be monitored and adjusted in real time.
Suzhou Preferred Cooling Copper Foil Manufacturer
At the same time of thinning, it is also necessary to improve the tensile strength, elongation and other indicators, otherwise it is easy to cause copper foil fracture, affecting the safety of the battery. Therefore, it is the general trend that the future use will be more light and meet the above indicators.
Suzhou Preferred Cooling Copper Foil Manufacturer
The production process of electrolytic copper foil is simple. There are three main processes: solution raw foil, surface treatment and product slitting. The production process seems simple, but it is a production process that integrates electronics, machinery and electrochemistry, and is particularly strict with the production environment. Therefore, the industry does not have a set of standard and universal production equipment and technology, and each manufacturer shows its own ingenuity, which is also an important bottleneck affecting the improvement of domestic production capacity and quality. In addition, the different requirements of customers have also resulted in the waste of many intermediate products copper foil in manufacturing. The one-time input-output ratio is even less than 80%, and these copper foils have to be manufactured again, wasting resources.
Suzhou Preferred Cooling Copper Foil Manufacturer
The copper foil industry belongs to the copper processing industry, which processes copper into extremely thin copper strips or sheets by means of rolling, electrolysis and sputtering, and further applies them as industrial raw materials in various downstream products. The thickness of μ Below m, the thickness varies depending on the scene used.
Suzhou Preferred Cooling Copper Foil Manufacturer
Although the thickness of copper foil gradually becomes thinner, power battery manufacturers use 6 μ When the product is less than or equal to m, the coating machine, winding machine and other key equipment as well as the technological level cannot solve the problems such as wrinkles, belt breakage and high-temperature oxidation encountered in the production process, which leads to the inability to mass produce ultra-thin copper foil with high yield.
