Copper foil processing of Suzhou preferred lithium battery
According to the burning degree of the substrate in the flame and after leaving the ignition source, it can be divided into general type and self extinguishing type; According to the bending degree of the substrate, it can be divided into rigid and flexible laminates; According to the working temperature and working environment conditions of the substrate, it can be divided into heat resistant, radiation resistant, high-frequency foil clad plate, etc. In addition, there are also laminates used in special occasions, such as prefabricated inner laminates, metal based laminates, and copper foil, nickel foil, silver foil, aluminum foil, Kang copper foil, beryllium copper foil laminates according to the type of foil.
Copper foil processing of Suzhou preferred lithium battery
With electrolytic copper or wire return material of equal purity as raw material, it is dissolved in the solution containing copper sulfate. Electrolysis is carried out in an electrolytic cell with insoluble material as anode and cathode roller immersed in copper sulfate electrolyte at constant speed as cathode. Copper in the solution is deposited on the surface of cathode roller to form copper foil. The thickness is controlled by cathode current density and cathode roller speed. After the roller rotates out of the liquid level, it is continuously stripped from the cathode roll, washed, dried and rolled to generate the original foil.
Copper foil processing of Suzhou preferred lithium battery
Silane coupling agent treatment: after anti oxidation treatment, the surface is sprayed with silane, which can improve the oxidation resistance at room temperature on the one hand; On the other hand, in high temperature pressing plate, silane can better combine copper foil and resin substrate through coupling, and improve peel strength. Post treatment process - drying. In order to prevent the harm of residual moisture, it must be dried at not less than 100 ℃ later, and the drying temperature cannot be too high.
Copper foil processing of Suzhou preferred lithium battery
If the surface stain is caused by environmental problems, the cleaning and improvement of the air conditioning filter system should be strengthened, or the wind speed should be reduced, and the small hairs on the air conditioning filter bag must be completely removed. And the fibers and powders on the polymer materials must be completely removed, which are very easy to cause stains. The air supply pipeline is easy to use plastic material, which does not produce fiber and is easy to clean with water, acid and alkali.
