Zhongshan Preferential Electronic Copper Foil Processing
Galvanizing barrier layer: After the rough surface is galvanized, a barrier layer is formed to improve the oxidation resistance of the copper foil in natural air. After galvanizing, the appearance will look gray. After a period of storage, the gray will turn into copper yellow. The more zinc is plated, the more yellow the copper foil will be.
Zhongshan Preferential Electronic Copper Foil Processing
Curing treatment: deposit a layer of dense metal copper in the nodular particle gap of the roughening layer, increase the contact surface between the roughening layer and the wool foil substrate, and reduce the roughness of the roughening layer surface. Microscopically, after rough surface roughening treatment, the foil surface is uneven and undulating greatly, while after curing treatment, the copper foil surface is relatively flat. After curing treatment, although the roughness is reduced, the bonding strength between the treatment layer and the insulating substrate material is improved due to the increased contact area between the roughened layer and the wool foil, which fundamentally eliminates the delamination between the treatment layer and the wool foil.
Zhongshan Preferential Electronic Copper Foil Processing
Foil making material requirements: the thinner the thickness is, the higher the quality grade is, and the lower the impurity content in the electrolyte is required. In order to ensure the quality, the purity of copper must be greater than 99.9%.
Zhongshan Preferential Electronic Copper Foil Processing
The foil of the clad plate can be copper, nickel, aluminum and other metal foils. However, considering such factors as the conductivity, solderability, elongation, adhesion to the substrate and price of gold, it is considered appropriate except for special purposes.
Zhongshan Preferential Electronic Copper Foil Processing
High end lithium battery copper foil needs to meet the requirements of high energy density, high safety, lightweight and other characteristics of power batteries, which is also the development trend of power batteries in the future. In order to meet the above characteristics, thinner lithium copper foil means smaller resistance, so the energy density and other performance of the battery will be improved. Moreover, the thinner the copper foil of lithium battery is, the lighter the weight of the corresponding battery will be.
Zhongshan Preferential Electronic Copper Foil Processing
Calendered copper foil is the original foil made from copper plate by repeated rolling, and then roughened according to requirements. Due to the limitation of processing technology, its width is difficult to meet the requirements of rigid copper clad laminate, so calendered copper foil is rarely used on rigid copper clad laminate; However, because the bending resistance and elastic coefficient are greater than electrolytic copper foil, they are often used on flexible copper clad laminate.
